Quarter-Turn Model P, Q, R & M - Emerson EIM E796 M2CP Installation And Maintenance Manual

Installation and Maintenance Manual
E2K-402-0817 Rev. 2
5.2 Quarter-Turn Model P, Q, R & M
Top-mount P, Q and R and several models of M/MG's side-mount do not require MDPI gear
reduction assembly for 1-turn Pot. If multi-turn Pot is required, EIM JOB SPEC SHEET will list
84131-0000 or the correct assembly. Spec Sheet will list,(1) Pot clutch gear, (2) Pot input
gear and (3) potentiometer.
Figure 12
Multi-turn Actuators
(1) Clutch Gear
(2) Pot Input
Gear
(3) Potentiometer
Section 5: Multi-turn Actuators
August 2017
16