Table of Contents
Advertisement
HMI
3.6.3 Telnet server
Establishing a Telnet con-
nection
Commands
HB160 | PPC | 67S-RRJ0 | en | 23-10
4.
After you've confirmed the pre-settings, start your ftp client (e.g. Windows Explorer)
and enter the following text into the "address bar":
ftp://wince:vipatp@IP-Adresse
ð In the appearing explorer window you can execute the requested file opera-
tions.
Telnet is a text based client-server protocol on TCP level. Using of a Telnet client like e.g.
the "MS-DOS console" in your Windows
all file remote functions at your Panel PC like copy, delete and create files and directories.
You can also start applications. Terminating an application is not possible.
The establishing of a Telnet connection is password protected and has the following
approach:
1.
Start a Telnet client like for example "MS-DOS console" at your PC and enter the
following into the address bar: telnet IP address.
ð When the connection is established, the Panel PC asks for the user name and
the password.
2.
Enter the following:
Login: wince
Password: vipatp (entry is hidden)
ð After entering valid user data a command line for entries appears:
By entering Exit res. closing the window you can terminate the Telnet connection at any
time.
After establishment of a Telnet connection the Panel PC provides you with commands. A
list of possible commands with a short description is available via the command help. By
beginning with "help" before a command you receive help to this command.
Integrated server > Telnet server
Ò
operating system you may execute text based
Deployment Panel PC
35
Advertisement
Table of Contents
