Memory Management - YASKAWA 67S-PNJ0-EB Manual

Hardware description
Structure > Memory management

2.3.3 Memory management

Overview
Work memory
User memory
USB storage media
Slot for CFast
16
n 2GB work memory
2GB SATA DOM user memory
n
USB storage media using "Host"-USB-A interface
n
n Slot for CFast memory card
The Panel PC has a work memory with a size of 2GB. The work memory is not buffered
and is deleted after shut down.
As internal permanent storage medium the Panel PC has a 2GB flash module
(1600Mbyte for user data). After the start of Windows
under My Device.
The Panel PC has got three USB-A interfaces (1x USB 3.0 and 2x USB 2.0). The con-
nection of USB sticks and USB drives are supported by the Panel PC.
At the back of the Panel PC there is a card slot for a memory card. At this slot you can
plug storage modules of the type CFast 2.0 - 600 MB/s (6GBit/s) - SATA protocol - not
hot-swap compatible.
Pin Assignment
S1
S2 SATA_TX1+
S3
S4
S5 SATA_RX1+
S6
S7
PC1 CFAST_CDI
PC2
PC3
PC4
PC5
Prior to removing the CFast card, make sure the unit's power is off and
disconnected from the power supply.
GND
SATA_TX1-
GND
SATA_RX1-
GND
GND
n.c.
n.c.
n.c.
Ò
this memory is listed as Flashdisk
Pin Assignment
PC6 n.c.
PC7 GND
PC8 CFAST_LED1_C
PC9 CFAST_LED2_C
PC10 n.c.
PC11 n.c.
PC12 n.c.
PC13 VCC3
PC14 VCC3
PC15 GND
PC16 GND
PC17 CFAST_CDO
HB160 | PPC | 67S-RRJ0 | en | 23-10
HMI