Ebyte E18-DTU Series User Manual page 20

Chengdu Ebyte Electronic Technology Co., Ltd. E18-DTU Series User Manual
then click "set". After setting, you can click "read" again to confirm whether the setting is successful.
(4) Enter the transparent transmission mode. After clicking "Trans mode" on the host computer interface of the
coordinator device and the router device, both can enter the transparent transmission mode. One serial port inputs
any data, and the other serial port can completely output the same data.
Coordinator device Router device
After entering the transparent transmission mode, close the host computer configuration software and open the
serial port assistant. Input any data on either side, the other side will output the same data. The party that sends data
will return "OK" after sending data each time , indicating that the sending is successful, while return "FAIL" or
"ERRO" is to indicate failing to send.
Copyright © 2012–20 23 , Chengdu Ebyte Electronic Technology Co., Ltd.
19