Ebyte E18-DTU Series User Manual page 15

Chengdu Ebyte Electronic Technology Co., Ltd. E18-DTU Series User Manual
serial port number, select the serial port baud rate (default 115200), and click to "Open Uart".
(2) The module leaves the factory in HEX command configuration mode, click "Read Param", the message box prompts "Read
succeed", the main network parameters include: long address, the default radio type is coordinator (if not, please set it to Coordinator),
the network status is "not have" (if it is not, pls exit the network or restore the factory) . If failing to read parameters, it is possible that
the module is currently in transmission mode, and you need to click "Setting mode", and a message box will prompt "Enter
Configuration Status Successfully".
（3）Click "Start Net" to coordinate and establish an open network. After the coordinator creates a new network, it will continue to
Copyright © 2012–20 23 , Chengdu Ebyte Electronic Technology Co., Ltd.
14