MSI WindBOX III Plus Manual page 43

▶
Console Redirection
Console Redirection operates in host systems that do not have a
monitor and keyboard attached. This setting enables/disables the
operation of console redirection. When set to [Enabled], BIOS redirects
and sends all contents that should be displayed on the screen to the
serial COM port for display on the terminal screen. Besides, all data
received from the serial port is interpreted as keystrokes from a local
keyboard.
▶
Console Redirection Settings
▶
Terminal Type
To operate the system's console redirection, you need a terminal
supporting ANSI terminal protocol and a RS-232 null modem cable
connected between the host system and terminal(s). This setting
specifies the type of terminal device for console redirection.
▶
Bits per second, Data Bits, Parity, Stop Bits
This setting specifies the transfer rate (bits per second, data bits,
parity, stop bits) of Console Redirection.
▶
Flow Control
Flow control is the process of managing the rate of data transmis-
sion between two nodes. It's the process of adjusting the flow of
data from one device to another to ensure that the receiving device
can handle all of the incoming data. This is particularly important
where the sending device is capable of sending data much faster
than the receiving device can receive it.
MS-9A55
3-15