Cid Time Sync; Dial Mode - Amplicomms PowerTel 2880 User Manual

CID time sync

If you subscribe to a Calling Number Display service, the
date and time are set automatically with each incoming call.
Follow the steps below to turn the CID time sync feature on
or off. For more information contact your telephone service
provider.
1. In idle state press the menu key
2. Select Settings and press SELECT on the corded phone or
press
3. Select CID time sync and press SELECT on the corded phone
or press
4. Select On or Off and press SELECT on the corded phone or
press

Dial mode

The standard dialling mode for analogue phones is "touch-
tone". On some older phone systems the dialling mode must
be set to "pulse". Please see your phone system's user guide
for more information.
1. In idle state press the menu key
2. Select Settings and press SELECT on the corded phone or
press
3. Select Dial mode and press SELECT on the corded phone or
press
4. Select Touch-tone or Pulse and press SELECT on the corded
phone or press
Helpline 0844 800 6503 (See page 51 for costs and hours of operation)
on the cordless handset.
on the cordless handset.
on the cordless handset.
on the cordless handset.
on the cordless handset.
on the cordless handset.
or .
or .
39