Remote Access Code; Message Alert Tone - Amplicomms PowerTel 2880 User Manual

Remote access code

A two-digit security code is required to access the answering
machine remotely from any touch-tone telephone. The preset
code is "00" . You can set the code from "00" to "99" .
1. In idle state press the menu key
2. Select Answering system and press SELECT on the corded
phone or press
3. Select Ans sys setup and press SELECT on the corded phone
or press
4. Select Remote code and press SELECT on the corded phone
or press
5. Enter a two-digit code and press SELECT on the corded
phone or press

Message alert tone

When this feature is on, the corded phone beeps every 10
seconds when there are new messages on the answering
machine. The alert tone is only heard on the corded phone.
Press any key (except Paging) to switch the alert off for the
current message only. The alert will sound again for the next
new message.
1. In idle state press the menu key
2. Select Answering system and press SELECT on the corded
phone or press
3. Select Ans sys setup and press SELECT on the corded phone
or press
4. Select Msg alert tone and press SELECT on the corded
phone or press
5. Select On or Off and press SELECT on the corded phone or
press
48
Helpline 0844 800 6503 (See page 51 for costs and hours of operation)
on the cordless handset.
on the cordless handset.
on the cordless handset.
on the cordless handset.
on the cordless handset.
on the cordless handset.
on the cordless handset.
on the cordless handset.
or .
or .