Controls & Display - Levoit Vital 100S User Manual

C O N T R O L S & D I S P L AY
Note: You can also use the VeSync app to control these functions, as well as additional
app-only features (see page page 14 ).
Auto Mode Button
• Turns Auto Mode on (see
page 11).
Sleep Mode Button
• Turns Sleep Mode on (see
page 11).
• Press and hold for 3
seconds to reset the Check
Filter Indicator.
Check Filter Indicator
• Lights up red when the filter
should be checked (see
Check Filter Indicator, page
18).
• To reset the Check Filter
Indicator, press and hold
for 3 seconds. The Check
Filter Indicator will flash 3
times, and turn off.
Fan Speed Button & Indicators
• Cycles through fan speeds:
low (1 indicator will light up),
medium (2 indicators), high
(3 indicators), and turbo (4
indicators).
• Tapping
purifier is in Auto Mode,
Sleep Mode, or Pet Mode
(when the display is lit up)
will exit that mode.
Air Quality Indicator
• These indicator rings use
an automatic infrared dust
sensor to display the air
quality: Blue (Very Good),
Green (Good), Orange
(Moderate), Red (Bad).
while the air
On/Off Button
• Turns the air purifier on/off.
• Press and hold for 5 seconds
to connect the air purifier
to the VeSync app. See the
in-app instructions for more
information (see page 10).
• Press and hold for 15 seconds
to reset the air purifier and
disconnect from Wi-Fi® (see
page 10).
Wi-Fi Indicator
• Blinks when connecting to
the VeSync app, lights up
when connected to VeSync,
and is off when disconnected
from VeSync. See the VeSync
in-app instructions for more
information (see page 10).
Timer Button & Indicators
• Cycles through timer options:
2 hours, 4 hours, and 8 hours
(see page 12).
Note: The timer indicators
will light up with the
corresponding timer selected.
• lights up when the timer
function is used through the
VeSync app.
EN
7