Table of Contents
Advertisement
C O N T R O L S & D I S P L AY
Note: You can also use the VeSync app to control these functions, as well as additional app-only features
(see page 9).
On/Off Button
•
•
•
Display
•
•
•
Sleep Mode Button
•
Auto Mode Button
•
Turbo Mode Button
•
6
Turns the air purifier on/off.
Press and hold for 5
seconds to connect the air
purifier to the VeSync app.
See the in-app instructions
for more information.
Press and hold for 15
seconds to reset the air
purifier and disconnect from
Wi-Fi (see page 9).
Shows information related
to air quality and air purifier
settings.
By default, the display will
show the overall clean air
percentage.
The display will reset to
default when the air purifier
is turned on/off.
Turns Sleep Mode on/off
(see page 10).
Turns Auto Mode on/off
(see page 10).
Turns Turbo Mode on/off
(see page 10).
Air Info Button
•
Changes the type of air
quality information shown
on the center of the display.
•
Cycles through air quality
readings for PM1.0, PM2.5,
PM10, and overall clean
air percentage (see Air
Information, page 11).
•
The chosen air quality
information will stay on the
display until you restart the
air purifier.
Filter Info Button
•
Shows the filter life
percentage on the center
of the display. After a few
moments, the display
will return to its previous
setting.
•
Button lights up when the
filter should be checked
(see Check Filter Indicator,
page 17).
•
Press and hold for 3
seconds to reset the
indicator (see page 17).
Air Quality Indicator Rings
•
These indicators use an
automatic sensor to display
the air quality: Blue (Very
Good), Green (Good),
Orange (Moderate), and
Red (Bad).
Advertisement
Table of Contents
