Controls & Display - Levoit Vital 100S User Manual

C O N T R O L S & D I S P L AY
Note: You can also use the VeSync app to control these functions, as well as additional
app-only features (see page 13).
Auto Mode Button
•
Sleep Mode Button
•
•
Check Filter Indicator
•
•
Fan Speed Button & Indicators
•
•
Air Quality Indicator
•
6
Turns Auto Mode on (see
page 10).
Turns Sleep Mode on (see
page 10).
Press and hold for 3
seconds to reset the Check
Filter Indicator.
Lights up red when the filter
should be checked (see
Check Filter Indicator, page
17).
To reset the Check Filter
Indicator, press and hold
for 3 seconds. The Check
Filter Indicator will flash 3
times, and turn off.
Cycles through fan speeds:
low (1 indicator will light up),
medium (2 indicators), high
(3 indicators), and turbo (4
indicators).
Tapping while the air
purifier is in Auto Mode,
Sleep Mode, or Pet Mode
(when the display is lit up)
will exit that mode.
These indicator rings use
an automatic infrared dust
sensor to display the air
quality: Blue (Very Good),
Green (Good), Orange
(Moderate), Red (Bad).
On/Off Button
• Turns the air purifier on/off.
• Press and hold for 3
seconds to connect the air
purifier to the VeSync app.
See the in-app instructions
for more information (see
page 9).
• Press and hold for 3
seconds to reset the air
purifier and disconnect from
Wi-Fi® (see page 9).
Wi-Fi Indicator
• Blinks when connecting
to the VeSync app, lights
up when connected to
VeSync, and is off when
disconnected from
VeSync. See the VeSync
in-app instructions for more
information (see page 9).
Timer Button & Indicators
• Cycles through timer
options: 2 hours, 4 hours,
and 8 hours (see page 11).
Note: The timer indicators
will light up with the
corresponding timer selected.
• lights up when the timer
function is used through the
VeSync app.