GSU 75B Configuration Module Removal & Replacement
Figure 6-5, GSU 75B Configuration Module Installation
Table 6-3, GSU 75B Configuration Module Kit – 011-00979-20
Item
1
Sub-Assy, Potted, Config Mdl, w/EEPROM,Jackscrew
2
Cable, 4-Conductor Harness
3
Pins, #22 AWG (HD)
4
Pan Head Screw
Removal:
1. Disconnect connector from LRU.
2. Remove two screws from cover.
3. Remove one screw from configuration module attaching it to the backshell.
4. Lift up configuration module and unplug the connector.
Installation:
1. Inspect connector for damaged pins.
2. Plug in the configuration module.
3. Set configuration module in backshell and attach using one screw.
4. Reinstall the cover using two screws.
5. Reattach connector to LRU.
6. Checkout per Section 6.17.4.
G1000 NXi System Maintenance Manual
King Air 300 Series
190-00716-N1
Description
CONFIGURATION MODULE
Qty Needed
1
1
4
1
Garmin Part
Number
011-02179-00
325-00122-00
336-00021-00
211-60232-07
Page 242
Revision 1