Settings>Calibrate Touch Screen; Settings>Network; Connecting To Public Wi-Fi Hotspot; Turn Wi-Fi Off - Pandigital Novel User Manual

Settings>Calibrate Touch Screen
If you notice that the touch screen is not responding accurately, you may need to
re-calibrate the touch screen sensors.
Settings
1. Select
Calibrate
2. Tap
3. When the pop-up windows appear, use a pointed device to accurately tap the
+
" " in the designated spots on the screen.
4. If calibration is successful, you can resume normal use. If unsuccessful,
repeat the calibration again.
Settings>Network
In order to connect to the Internet, you must have a Wi-Fi network set up on your
p a n d i g i t a l n o v e l
Settings
1. Select
2. The device scans and lists all local Wi-Fi Networks found. A
secure networks that require login name/password to connect.
3. Tap the desired network to which you want to connect,
Password
4. Tap to close the

If your Wi-Fi network is set as hidden, it won't be found by the auto scan. Tap
Other
and then enter the network name and key,

(Advanced): After saving the Wi-Fi network, you can change your network
settings by selecting

Connecting to Public Wi-Fi Hotspot

If you are connecting via a public Wi-Fi hotspot, it may be necessary to
immediately launch the browser and provide the hotspot login information
prior to having an active internet connection.
1. Follow steps 1-5 above to select the hotspot Wi-Fi network.
2. Select
3. Enter the login information as required by the hotspot.

Turn Wi-Fi Off

There may be times when you want to prevent your device from connecting
to a Wi-Fi network, even if you've set the network up on your device.
from the Application Quick Launch Bar,
to perform the calibration.
.
from the Application Quick Launch Bar,
if applicable.
Settings
Manual Setup
Web
from the Application Quick Launch Bar.
screen.
, and then follow the prompts.
39
Calibrate

tap
Network

tap
indicates

enter the
Save

tap .
.
.
Network