Hard drive
NOTE:
The hard drive spare part kit does not include the hard drive cover.
Table 5-4
Hard drive descriptions and part numbers
Description
Hard drive, 1 TB, 5400 rpm, 7 mm
Hard drive, 500 GB, 7200 rpm, 7 mm
Hard drive cable
Hard drive bracket
Before removing the hard drive, follow these steps:
1.
Prepare the computer for disassembly
2.
Remove the rubber feet (see
3.
Remove the bottom cover (see
4.
Remove the battery (see
To remove the hard drive:
1.
Open the system board ZIF connector (1), and then disconnect the cable (2).
2.
Lift the front of the hard drive (3), and then remove it (4) from the computer.
3.
To remove the hard drive bracket and connector cable, pull the sides up and away from the hard drive
(1), and then remove the bracket from the hard drive (2).
32
Chapter 5 Removal and replacement procedures for authorized service provider parts
(Preparation for disassembly on page
Computer feet on page
Bottom cover on page
Battery on page
31).
27).
27).
29).
Spare part number
762990-005
703267-005
L23187-001
L24490-001