SANY SCC3000US Operation Manual page 5

View thousands of Crane Specifications on FreeCraneSpecs.com
View thousands of Crane Specifications on FreeCraneSpecs.com
4) Scope of Application: values or rated loads listed in the load charts are all applicable for the whole
Chapter
360°slewing range.
360°
5). Rated Load for Traveling Crane: values of rated loads listed in the load charts are calculated
5) Rated Load for Traveling Crane: values of rated loads listed in the load charts are calculated in
in condition that the crane is not traveling, and these values should be decreased accordingly
condition that the crane is not traveling, and these values should be decreased accordingly when
the crane is traveling. For traveling steadily at low speed, 90% of the rated load is allowed to attach
when the crane is traveling. For traveling steadily at low speed, 90% of the rated load is
in H operating condition for straight-line traveling, or 70% of the rated load is allowed to attach in H
allowed to attach in H operating condition for straight-line traveling, or 70% of the rated load
operating condition for turning, or 50% of the rated load is allowed to attach in FJ operating condition
is allowed to attach in H operating condition for turning, or 50% of the rated load is allowed
and LJ operating condition for straight-line traveling.
to attach in FJ operating condition and LJ operating condition for straight-line traveling.
Notices requiring special care for traveling with load:
Notices requiring special care for traveling with load:
a) It is suggested to move the load in an area as small as possible and make the load close to the ground enough
a) It is suggested to move the load in an area as small as possible and make the load close
(with maximum distance of 500mm
to the ground enough (with maximum distance of 500mm
b) Only the low gear can be used if possible, and take proper measures to prevent the load swinging. For
b) Only the low gear can be used if possible, and take proper measures to prevent the load
specifications on traveling, please refer to the "Traveling Operation" in Chapter Ⅱ of this manual.
swinging. For specifications on traveling, please refer to the "Traveling Operation" in
Chapter Ⅱ of this manual.
Load Charts
Ⅲ
Center line of track
longitudinal
center line of
lower-works
Center line of track
(1'7.7") to the ground);
Section 4-Load Charts
SCC3000US Crawler Crane ― Operation Manual
SCC500E Operating Manual
Center line of
operating equipment
slewing center
(1 7.7 ) to the ground);
- 3 / 16 -