Instrument Cluster Display Selectable Menu Items - Chrysler 300 2017 Owner's Manual

Instrument Cluster Display
Selectable Menu Items
Push and release the up or down arrow button
until the desired Selectable Menu item is dis-
played in the instrument cluster display.
Follow the Menu or submenu prompts as de-
sired.
Speedometer
Push and release the OK button to toggle
between MPH and km/h.
Vehicle Info
The Vehicle Info consists of the following sub-
menu (pushing the left or right arrow button will
allow you to scroll through the submenu):
• Tire Pressure Monitor
• Coolant Temp
• Trans Temp
• Oil Temp
• Oil Pressure
• Oil Life
• Battery Voltage
• AWD Status — If Equipped
Driver Assist
The Driver Assist menu provides the status and
visuals about the Adaptive Cruise Control and
LaneSense features. When they are both off the
78
screen, the display will read "Adaptive Cruise
Control (ACC) and LaneSense Off."
Adaptive Cruise Control (ACC) Feature — If
Equipped
The instrument cluster display displays the cur-
rent ACC system settings. The information dis-
played depends on ACC system status.
Push the Adaptive Cruise Control (ACC) ON/
OFF button (located on the steering wheel) until
one of the following displays in the instrument
cluster display:
Adaptive Cruise Control Off
When ACC is deactivated, the display will read
"Adaptive Cruise Control Off."
Adaptive Cruise Control Ready
When ACC is activated but the vehicle speed
setting has not been selected, the display will
read "Adaptive Cruise Control Ready."
Push the SET + or the SET- button (located on
the steering wheel) and the following will display
in the instrument cluster display:
ACC Set
When ACC is set, the set speed will display in
the instrument cluster.
The ACC screen may display once again if any
ACC activity occurs, which may include any of
the following:
• Distance Setting Change
• System Cancel
• Driver Override
• System Off
• ACC Proximity Warning
• ACC Unavailable Warning
Refer to "Adaptive Cruise Control (ACC) — If
Equipped" in "Starting And Operating" for further
information.
LaneSense — If Equipped
The instrument cluster display displays the cur-
rent LaneSense system settings. The informa-
tion displayed depends on LaneSense system
status. Push the LaneSense button (located on
the center stack below the Uconnect display)
until one of the following displays in the instru-
ment cluster display:
• LaneSense Off
• When LaneSense is deactivated, the display
will read "LaneSense Off."
• Lane Sense On
• When LaneSense is activated, the display will
read "LaneSense On."
Refer to "LaneSense — If Equipped" in "Starting
And Operating" for further information.