Instrument Cluster Display Selectable Menu; Items - Chrysler 300 2022 Owner's Manual

I C D
NSTRUMENT LUSTER ISPLAY
S M I
ELECTABLE ENU TEMS
Push and release the up or down
button until the desired Selectable Menu item is
displayed in the instrument cluster display.
Follow the Menu or submenu prompts as desired.
Speedometer
Push and release the OK button to toggle between
mph and km/h.
Vehicle Info
The Vehicle Info consists of the following submenu
(pushing the left or right arrow button will
allow you to scroll through the submenu):
Tire Pressure Monitor

Coolant Temperature

Transmission Temperature

Oil Temperature

Oil Pressure

Oil Life

AWD Status — If Equipped

Battery Voltage

Driver Assist — If Equipped
The Driver Assist menu provides the status and a
visual about the Adaptive Cruise Control and
arrow LaneSense features. When they are both off the
screen, the display will read "Adaptive Cruise
Control (ACC) and LaneSense Off."
Adaptive Cruise Control (ACC) Feature —
If Equipped
The instrument cluster display displays the current
ACC system settings Ú page 100. The information
displayed depends on ACC system status.
Push the ACC ON/OFF button (located on the
steering wheel) until one of the following displays
in the instrument cluster display:
Adaptive Cruise Control Off
When ACC is deactivated, the display will read
"Adaptive Cruise Control Off."
Adaptive Cruise Control Ready
When ACC is activated but the vehicle speed
setting has not been selected, the display will read
"Adaptive Cruise Control Ready."
Push the SET + or the SET- button (located on the
steering wheel) and the following will display in the
instrument cluster display:
GETTING TO KNOW YOUR INSTRUMENT PANEL
ACC Set
When ACC is set, the set speed will display in the
instrument cluster.
The ACC screen may display once again if any ACC
activity occurs, which may include any of the
following:
Distance Setting Change

System Cancel

Driver Override

System Off

ACC Proximity Warning

ACC Unavailable Warning

LaneSense — If Equipped
The instrument cluster display displays the current
LaneSense system settings Ú page 114. The
information displayed depends on LaneSense
system status. Push the LaneSense button
(located on the center stack below the Uconnect
display) until one of the following displays in the
instrument cluster display:
LaneSense Off

When LaneSense is deactivated, the display will
read "LaneSense Off."
LaneSense On

When LaneSense is activated, the display will
read "LaneSense On."
73
3