Advertisement
1. Page Setting dialog
<Fig.9. Page Setting dialog>
1) Paper Size
The size of paper is selected.
The number of print pixels for each paper size is
shown in the right table.
2) Orientation
The direction of paper is set.
This is the standard setting function of the operat-
ing system.
3) Scale
Enlargement scale is set.
This is the standard setting function of the operat-
ing system.
2. Print Setting dialog
Select "Printer Features" of "Print Setting" dialog to carry out the following settings.
2.1. Setting 1
<Fig.10 Print Setting dialog>
1) Paper Type
High density paper/High glossy paper/Standard paper
The paper type is selected.
2) Mirror
The function horizontally reverses the print output.
3) 180 degree rotate
The function rotate 180 degrees the print output.
4) Continuous print
When turning on, the same image has been printed until paper runs out.
* Press the FEED button on the printer, to stop the continuous print.
* The printer gives priority to a continuous print even if the number of copies is set from the application.
Function explanation
Paper size
1280x960
1280x1280
1280x1920
1280x5760
125%(1024x768)
160%(800x600)
200%(640x480)
3
Image size
1280x960
1280x1280
1280x1920
1280x5760
1024x768
800x600
640x480
MITSUBISHI Digital Monochrome Printer P93DW
Effective pixels
1280x960
1280x1280
1280x1920
1280x5760
1280x960
1250x938
1280x960
Advertisement
