Mitsubishi CP770DW Operation Manual
  1. Manuals
  2. Brands
  3. Mitsubishi Manuals
  4. Printer
  5. CP-770DW
  6. Operation manual

Mitsubishi CP770DW Operation Manual

Digital color printer
Hide thumbs Also See for CP770DW:
Table of Contents

Advertisement

Quick Links

Download this manual
DIGITAL COLOR PRINTER
MODEL
CP770DW
OPERATION MANUAL
ALARM
SHEET/PAPER
SCSI
DATA
POWER
THIS OPERATION MANUAL IS IMPORTANT
TO YOU.
PLEASE READ IT BEFORE USING YOUR
DIGITAL COLOR PRINTER.
This digital color printer complies with the requirements of the EC
Directive 89/336/EEC, 73/23/EEC, 93/42/EEC and 93/68/EEC.
The electro-magnetic susceptibility has been chosen at a level that
gains proper operation in residential areas, on business and light
industrial premises and on small-scale enterprises, inside as well as
outside of the buildings. All places of operation are characterised by
their connection to the public low voltage power supply system.
CP770DW
OPEN

Advertisement

Table of Contents
loading

Related Manuals for Mitsubishi CP770DW

Summary of Contents for Mitsubishi CP770DW

  • Page 1 DIGITAL COLOR PRINTER MODEL CP770DW OPERATION MANUAL CP770DW ALARM SHEET/PAPER SCSI DATA POWER OPEN THIS OPERATION MANUAL IS IMPORTANT TO YOU. PLEASE READ IT BEFORE USING YOUR DIGITAL COLOR PRINTER. This digital color printer complies with the requirements of the EC Directive 89/336/EEC, 73/23/EEC, 93/42/EEC and 93/68/EEC.
  • Page 2 WARNING: In the USA or Canada, use the AC power cord according to the recommendations as below, in order to comply with UL2601-1 and CAN/CSA C22.2 No. 601.1. Case 1. Connect to the 120V receptacle of the room or the host equipment. The AC power cord should be UL or CSA approved and consist of type SJT, size 16 or 18AWG, length 2.5m or shorter cord with IEC320/C13 type, 125V 10A or higher rating connector and NEMA 5-15 type, 125V 10A or higher rating, Hospital Grade plug.
  • Page 3 CAUTION: RISK OF ELECTRIC SHOCK DO NOT OPEN. TO REDUCE THE RISK OF ELECTRIC SHOCK,DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALI- FIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage"...
  • Page 4 The SCSI cable with appropriate plug should be 1 m long or shorter, comply with SCSI II standard, Mitsubishi Electric Corporation JC-50V50V or equivalent one. This product is to be employed with medical equipment, just for reference purpose, not for medical...
  • Page 5 CP770DW. WARNING: The Model CP770DW should not be used adjacent to or stacked with other equipment and that if adja- cent or stacked use is necessary, the Model CP770DW should be observed to verify normal operation in the configuration in which it will be used.
  • Page 6 Guidance and manufacturer's declaration - electromagnetic emissions The Model CP770DW is intended for use in the electromagnetic environment specified below. The customer or user of the Model CP770DW should assure that it is used in such an environment. Compliance Emission test...
  • Page 7 Guidance and manufacturer's declaration - electromagnetic immunity The Model CP770DW is intended for use in the electromagnetic environment specified below. The customer or user of the Model CP770DW should assure that it is used in such an environment. Immunity test...
  • Page 8 Recommended separation distances between Portable and mobile RF communications equipment and the Model CP770DW The Model CP770DW is intended for use in the electromagnetic environment in which radiated RF disturbances are controlled. The customer or user of the Model CP770DW can help prevent...

  • Page 9: Table Of Contents

    CONTENTS Contents ....................1 Safety precautions ................2-4 Special features ..................5 Unpacking ..................... 6 Features and functions ................. 7-8 Front panel ..................... 7 Inside of Printing Unit ................8 Rear panel ..................... 8 Connections ..................9-11 Connection with parallel data interface ..........9-10 Connection with SCSI data signal equipment ........

  • Page 10: Safety Precautions

    SAFETY PRECAUTIONS In the interest of safety, please observe the following precautions: POWER REQUIREMENT This product is designed for operation on 100-120V AC or 220-240V AC 50/60Hz. Never connect to any outlet or power supply having a different voltage or frequency. WARNING: THIS APPARATUS MUST BE GROUNDED.
  • Page 11 BE CAREFUL WITH THE PRINTING MECHANISM Do not move the printer while the printing mechanism is slid out. This may cause injury. Be careful not to catch your fingers in the printing mechanism when sliding the mechanism back into the normal closed position. CONNECTING CABLES Use the power cord supplied with the printer.
  • Page 12 SAFETY PRECAUTIONS CONNECTING DEVICES Read thoroughly the Safety Notices, Cautions and “Operating Precautions” of the instruction booklets for the other devices connected with the unit. CAUTION ON RELOCATING When transporting this unit, make sure it is not likely to be subjected to impacts. They can be a primary cause for damage. Always use the mechanism protective cushion and the transport shipping screw when shipping the unit.

  • Page 13: Special Features

    Maximum of 200 prints per roll with S size media. Large capacity per roll reduces time for frequent media loading. HIGH QUALITY PRINTING CP770DW is a dye sublimation thermal transfer color printer which produces superior high quality images. It also produces a continuous tone at 256 gradient and 16.7 million colors for each YMC.

  • Page 14: Unpacking

    UNPACKING UNPACKING Take the unit out of the box by the following procedures. Make sure to check the contents. 1 1 1 1 1 Open the top of the box. 2 2 2 2 2 Remove the accessory box. 3 3 3 3 3 Remove the cushion above the unit.

  • Page 15: Features And Functions

    FEATURES & FUNCTIONS FRONT PANEL 2 3 4 CP770DW PAPER FEED &CUT COPY ONLINE ALARM SHEET/PAPER OPTION DATA POWER OPEN 7 7 7 7 7 1 1 1 1 1 COPY BUTTON POWER BUTTON When pressing this button, the transferred data will be Press to turn on power .

  • Page 16: Inside Of Printing Unit

    FEATURES & FUNCTIONS INSIDE OF PRINTING UNIT 3 3 3 3 3 1 1 1 1 1 INK CASSETTE COMPARTMENT SLIDE SWITCH Load the cassette with ink sheet. Selects input PARALLEL and OPTION (SCSI) terminal 4 4 4 4 4 input.

  • Page 17: Connections

    No. 1 No. 2 No. 6 Mode Details Standard mode When printing with the driver for CP770DW Compatible mode1 (fine print)* When printing with the driver for CP700DU/DE and CP700DSU/DSE Compatible mode1 (standard print)** When printing directly from HC-300, DS-300/330 series with SCSI I/F (option)
  • Page 18 POWER 3 3 3 3 3 Confirm that the ON LINE button on the front panel is lit. • When ON LINE is selected, the lamp illuminates. CP770DW PAPER FEED &CUT COPY ONLINE NOTE You do not need to press the ONLINE button when it is already lit. In the following conditions, ON LINE lamp illuminates when turning on the power.

  • Page 19: Connection With Scsi Data Signal Equipment

    CONNECTION WITH SCSI DATA SIGNAL EQUIPMENT SCSI interface is available if optional SCSI board is installed. SCSI board is installed at the rear option slot of the unit. See the operations manual of the optional SCSI board. Make sure to turn off the power before installing the option board. (EXAMPLE) To SCSI port To SCSI port...

  • Page 20: Before Operation

    BEFORE OPERATION Before printing, 1. Remove the transport screw on the bottom of printing mechanism and the protective cushion. (See below) 2. Install the print paper and ink cassette. (pages 13-15) REMOVING TRANSPORT SCREW AND PROTECTIVE CUSHION To prevent damage during transportation/shipping, a protective cushion is inserted into the mechanism, and the printing mechanism is locked into position from the bottom with a transport screw.
  • Page 21 2 2 2 2 2 Bobbin with Bobbin INSTALLING MONOCHROME THERMAL PAPER gear without gear 1 1 1 1 1 Put the supplied bobbins on the both sides of the thermal paper roll. NOTE Set the bobbins as shown in the right figure. Make sure to put the bobbin on the correct position.
  • Page 22 BEFORE OPERATION 3 3 3 3 3 1 1 1 1 1 2 2 2 2 2 Roller Roller Insert the print paper under Roller in order. Roller 4 4 4 4 4 3 3 3 3 3 Insert the edge of the print paper under Roller Be sure to insert the paper straight.

  • Page 23: Installation Of Ink Sheet (For Color Print)

    INSTALLATION OF INK SHEET (For color print) White roller NOTE When using thermal paper, do not install the ink sheet. 2 2 2 2 2 INSTALLING THE INK SHEET Load the ink cassette with the ink sheet rolls before inserting the ink cassette into the 1 1 1 1 1 AB AB AB AB AB unit.

  • Page 24: Usage And Keeping Of Paper Sheet Set

    BEFORE OPERATION USAGE AND KEEPING OF PAPER SHEET SET BEFORE PRINTING • Fingerprints or dust on the paper’s surface may degrade print quality and cause paper jams. Immediately after the paper is replaced, 2-3 images may be printed with a blank part due to hand’s dust or oil.

  • Page 25: Installing Printer Driver

    INSTALLING PRINTER DRIVER Printer driver is required to print the data from a personal computer connected with this unit. The printer driver for Windows is supplied with this unit. ® Product name Operating conditions For Windows Applies for Microsoft Windows 95 and Windows ®...

  • Page 26: Troubleshooting

    TROUBLESHOOTING INDICATION ON THE FRONT PANEL & COUNTERMEASURES If for some reason printing is not possible or error occurs during printing, the indicator on the front panel will be lit. In this case, follow the procedure described below. : lit : goes on and of f : not lit ALARM...

  • Page 27: Overcoming Paper Jams

    OVERCOMING PAPER JAMS 1 1 1 1 1 Press OPEN button to pull out the printing unit. When it is not working, turn off the power once. Then try to press OPEN button again. 2 2 2 2 2 Remove the ink cassette. Unlock the ink cassette by pushing the cassette locking lever to inside.

  • Page 28: Before Calling For Service

    TROUBLESHOOTING BEFORE CALLING FOR SERVICE Use the following troubleshooting chart to try to resolve any apparent defect in operation. Symptom Check and Remedy No power Is the power cord plug disconnected from the outlet? Connect the power cord plug to the outlet firmly. In an event of power failure, turn the power OFF and wait approx.

  • Page 29: Cleaning

    CLEANING CLEANING A small amount of alcohol Cleaning as indicated below will help maintain stable printer operation and extend the printer’s life. Preparations Cleaning part How to fold tissue paper Alcohol (isopropyl alcohol) Tissue paper (Fold in half about 4 times, and use the folded side to clean.) Metal spatula Cotton buds Cleaning kit (Option)*...
  • Page 30 CLEANING 6 6 6 6 6 Cleaning paper guide shaft. The seal paste is stuck on the ditch part of the shaft if you use it for a long time. Wipe with tissue paper etc. which is soaked in a small amount of alcohol carefully . NOTE Do not touch the coated black surface with metals.

  • Page 31: Spec & Options

    SPEC & OPTIONS SPECIFICATIONS Class Digital Colour Printer Model CP770DW Printing method Sublimation Dye Thermal Transfer : 3 pass color printing (yellow, magenta and cyan) Thermal Print quality Dot resolution Max. 1,344x 960pixels (S size) 325PPI Max. 1,676x 1,344pixels (L size) Max.

  • Page 32: Spec & Options

    SPEC & OPTIONS OPTIONS 2 2 2 2 2 INK SHEET Product name Ink sheet size No. of prints Usage PK700S S size For 3 color use PK700L L size For 3 color use 2 2 2 2 2 PRINT PAPER Product name Ink sheet size No.

  • Page 33: Parallel Data Signal

    PARALLEL DATA SIGNAL PARALLEL DATA SIGNAL PARALLEL TERMINAL SIGNAL Pin number • Connector JD36SL equivalent (36-pin) • Input level • Parallel input connector port Signal allocation (Signal : Compatible) Pin No. Return pin No. Signal From/To Function STROBE PC/VCP Strobe pulse for data reading. Incoming pulse width should be 0.5 s minimum.
  • Page 34 PARALLEL DATA SIGNAL • Parallel input connector port Signal allocation (Signal : Nibble) Pin No. Return pin No. Signal From/To Function HostClk PC/VCP High 2 - 9 20 - 27 Unknown PC/VCP Unknown PtrBusy PC/VCP Sends data in “Low” when HostBusy is “Low”. After HostBusy turns “High”, this signal becomes “High”.
  • Page 35 • Parallel input connector port Signal allocation (Signal : ECP) Pin No. Return pin No. Signal From/To Function HostClk PC/VCP Forward data transfer : Becomes “Low” when PeriphAck is “Low” and there is data to be read. Returns to “High” when PeriphACK becomes “High”.
  • Page 36 MITSUBISHI DIGITAL ELECTRONICS AMERICA, INC. 9351 Jeronimo Road, Irvine, CA 92618, U.S.A. Phone 949-465-6000 Mitsubishi Electric Europe B.V. UK Branch Travellers Lane, Hatfield, Herts. AL10 8XB, England, U.K. Phone (0) 1707 276100 FAX (0) 1707 278755 German Branch Gothaer Strasse 8, 40880 Ratingen ; Postfach 1548, 40835 Ratingen ; Germany...

Table of Contents