Service Manual
Steps
6. Remove the soundproof sponge
Tear off the sticking stripe and then remove the
soundproof sponge.
7. Remove isolation plate
Remove the 2 screws connecting the isolation plate
and condenser side plate; remove the 3 screws
connecting the isolation plate and chassis, and then
remove the isolation plate.
8. Remove
4-way valve assy and
valve assy
Unsolder the welding joints connecting
expansion valve assy
capillary sub-assy, compressor and condenser;
remove the
4-way valve.
Note:
Before unsoldering the welding joint, wrap the 4-way
valve with a wet cloth completely to avoid damage to
the valve caused by high temperature.
Installation and Maintenance
electronic expansion
electronic
the 4-way valve assy with
electronic expansion valve assy
Procedure
isolation plate
and
soundproof sponge
4-way valve assy
electronic expansion
valve assy
103