Setting Time And Date - EPS Bio Technology smartLAB sprint nG User Manual

Setting Time and Date

Setting the current time and date in your meter is important if
you use the meter memory.
1. Press the right button to turn the meter
on.
2. The display shows the last 2-digit of
theyearthatflashesatthetopofdisplay
as well. Press the left button to adjust the
yearandpresstherightbuttontoconfirm
the setting.
3. Repeat step 2 to set date and time. The
flashingfieldistheoneyouarecurrently
setting. (A=AM, P=PM)
Note: AM means the time from 00:00 o'clock until 12:00 o'clock.
PM means the time from 12:00 o'clock until 24:00 o'clock.
59