Install Tv Setup - Philips 42PW9962 User Manual

Menu Language
INSTALLATION
Channel System
Automatic Installation
Manual Installation
Channel Label
Favorite channels
Setup
Audio Output
SETUP
CD-i/Photo CD
Surround Mode
Center Mode
Ext. Amplifier
Picture mute

Install TV setup

& Select Setup in the
INSTALLATION
é Use the
,
PICTURE SOUND
Audio Output
If you have audio equipment connected to your receiver, you can select two
types of audio output.
•
Select Variable with the p or π keys if you want to adjust the volume via
the TV when using your audio equipment to reproduce the TV sound signal. It
is possible that the volume control of the audio equipment needs to be
adjusted.
Select Constant if you want to adjust the volume with the volume control of
your audio equipment or if you want to record the sound of a TV program to
an audio recorder (tape, DCC,...).
CD-i/Photo CD
See Connect Peripheral Equipment, Other equipments, p. 20.
Surround Mode
According to the broadcast sound modes, select the Surround Sound
possibilities:
Pro Logic with Dolby Pro Logic broadcasting. Nice effects can be reached in
Pro Logic mode with good stereo broadcasts.
Dolby 3 Stereo if no surround speakers are connected or if oversynthesized
sounds result in annoying surround effects.
Hall with mono or poor stereo broadcasting.
Off if you want to switch off Surround Sound.
Which speakers are active, depends on the selected Surround mode.
See Dolby Pro Logic Install, p. 13.
Note: If you have only connected a right and left external speaker and no center
speaker, select Pro Logic and not Dolby3 Stereo in the Surround Mode menu
item. See also Center mode, Phantom selection.
Center Mode (only selectable in Dolby 3 Stereo or Pro Logic when you have
connected and selected external speakers)
With internal speakers: the item center mode can not be selected.
With external speakers: (external left and right speakers and a center speaker.
See Connect Peripheral Equipment, External Speakers, p. 21)
Note: Do not forget to put the red speaker button at the back of the receiver in
the
EXTERNAL SPEAKERS
•
When in Surround Mode you have selected Pro Logic, you can select
Normal, Phantom or Wide in the Center Mode;
•
When in Surround Mode you have selected Dolby 3 Stereo, you can select
Normal or Wide in the Center Mode;
•
Select Phantom if no external center speaker is connected;
•
Select Normal if you have connected a small center speaker which can not
reproduce low frequencies (< 100 Hz);
•
Select Wide if you have connected a full range external center speaker.
menu and press the OK key.
or key to return or to switch menu off.
FEATURE
position.
7