Table of Contents
Advertisement
INSTALLATION
Menu Language
Country
Automatic Installation
Manual Installation
Give Name
Reshuffle
Favourite Programmes
Connection diagrams
SETUP
J
SETUP
SETUP
J
CD-i/Photo CD
CD-i/Photo CD
Decoder/Descrambler
Information Line
TV
Provider
NEX
IEW
Auto Format
INSTALLATION
DECODER/DESCRAMBLER
J
Programme
Programme
Decoder Status
& Use the B keys to select the menu item.
é Use the OK key to activate.
" Use the red
None/0...99
Yes/No
Connection diagrams
See Connect Peripheral Equipment, p. 20.
Install TV Setup
key to return or switch menu off.
MENU
CD-i / Photo CD
See Connect Peripheral Equipment, TV and a CD-i / Photo CD, p. 21.
Define Decoder/Descrambler programme numbers
If you have connected a decoder or a descrambler, see p. 20, you can define
one or more programme numbers as decoder programme numbers.
•
Press the CD keys to select Off,
you connected your decoder.
•
Select Off if you do not want the selected programme number being activated
as a decoder programme number.
Select
when the decoder is connected to your EasyLink video recorder.
EXT2
When selecting the decoder, the message EasyLink: Downloading Presets....
appears on the screen.
Information Line
After the selection of a TV programme or after pressing the i key on the
remote control, a TV channel which broadcasts teletext may transmit the name
of the TV channel or the programme name or another message which appears
briefly in the information line on the screen.
When selected Off, the information line will only appear after pressing the i
key, and not after the selection of a TV channel.
Auto Format
Selecting Auto Format Yes, the screen will automatically be filled as much as
possible with the picture in case of no PALplus transmission or when TV
programmes are not carrying special signals detecting the correct screen
format.
With the q key on the remote control you can still select other picture
formats (see p. 9).
or
, the euroconnector where
EXT1
EXT2
7
Advertisement
Table of Contents
