Table of Contents
Advertisement
INSTALLATION
Menu Language
Country
Automatic Installation
Manual Installation
Give Name
Reshuffle
Favourite Programmes
J
SETUP
SETUP
SETUP
DVD
J
Digital Sources
Decoder/Descrambler
(Picture tilt)
Information Line
Factory settings
Auto format
INSTALLATION
Decoder/Descrambler
J
Programme
Programme
Decoder Status
Install TV Setup
& Use the cursor in the up/down, left/right direction to select the menu item.
é Use the OK key to activate.
" Use the red ® key to return or switch menu off.
Digital sources
See Connect Peripheral Equipment, p. 21 to connect your digital equipment,
like a DVD, satellite tuner or a similar digital device.
Define Decoder/Descrambler programme numbers
If a decoder or a descrambler is connected, see p. 20, you can define one or
more programme numbers as decoder programme numbers.
Yes/No
•
Press the cursor left/right to select the input used to connect to your
decoder Off,
•
Select Off if you do not want the selected programme number being
activated as a decoder programme number.
Select
When selecting the decoder, the message EasyLink: Downloading Presets....
appears on the screen.
Picture Tilt (only for 32" or 82 cm sets)
•
Select Picture Tilt with the cursor up/down.
•
Keep the cursor left/right pressed to adjust the rotation of the picture.
Information Line
After the selection of a TV programme or after pressing the i key on the
remote control, a TV channel which broadcasts teletext may transmit the
name of the TV channel, the programme name or another message. This
appears briefly in the information line on the screen.
When selected Off, the information line will only appear after pressing the
i key, and not after the selection of a TV channel.
Factory settings
Select Factory settings and press the OK key to restore picture and sound
settings, predefined in the factory.
Auto format
Selecting Auto format Yes, the screen will automatically be filled as much
as possible with the picture when TV programmes are not carrying special
signals detecting the correct screen format. With the q key on the remote
control you can still select other picture formats (see p. 9).
Installation
Select Installation and press the OK key to return immediately to the
INSTALLATION
To exit from the menu
' Press the red ® key on the remote control.
or
.
EXT1
EXT2
when the decoder is connected to your EasyLink video recorder.
EXT2
menu.
7
Advertisement
Table of Contents
