Install Tv Setup - Philips TV User Manual

INSTALLATION
Menu Language
Country
Automatic Installation
Manual Installation
Give Name
Reshuffle
Favourite Programmes
J SETUP SETUP
SETUP
J Digital sources Digital Sources
Decoder/Descrambler
Information line
Factory settings
Extra front speakers
Rear Speakers
Auto surround
TV provider none, 0...99
NEX IEW
Auto Format
DBE
INSTALLATION
Decoder/Descrambler
J
Programme Programme
Decoder Status

Install TV Setup

The Setup menu allows you to set up those settings which are considered as
only once and which are not related to the installation of the TV channels.
The Setup menu contains items that control the settings of the TV's functions
and features, services and peripherals you may have connected.
&
Use the cursor in the up/down, left/right direction to select the menu item.
é
Use the OK key to activate.
"
Use the Ï key to return or switch menu off.
Digital sources
See Connect Peripheral Equipment, p. 26 to connect your digital equipment,
like a DVD, satellite tuner or a similar digital device.
on/off
yes/no
Define Decoder/Descrambler programme numbers
If a decoder or a descrambler is connected, see p. 25, you can define one or
more programme numbers as decoder programme numbers.
Press the cursor left/right to select the input used to connect to your
decoder
Select
activated as a decoder programme number.
Select
EXT2
When selecting the decoder, the message EasyLink: Downloading Presets....
appears on the screen.
Dynamic Bass Enhancement (DBE)
Select DBE with the cursor up/down.
Press the cursor left/right to adjust the DBE control.When selected On, DBE
increases the low frequency audio range for the playback of TV sound.
Information Line
Select
i key on the remote control, a TV channel which broadcasts teletext may
transmit the name of the TV channel, the programme name or another
message.This is displayed on screen next to information about sound, picture
format and DNR setting.
When selected
displayed after the selection of a TV channel or after pressing the i key.
Factory settings
Select
settings, predefined in the factory.
Extra front speakers
See Connect Extra loudspeakers, Amplifier, p. 27.
If no extra front speakers/amplifier are connected, do not change the
predefined factory setting which is
Rear speakers
See Surround Settings Menu, p. 13.
If no rear speakers are connected, do not change the predefined factory
setting which is
, or .
Off
EXT1 EXT2
if you do not want the selected programme number being
Off
when the decoder is connected to your EasyLink video recorder.
and after the selection of a TV programme or after pressing the
On
, only sound, picture format and DNR information is
Off
and press the OK key to restore picture and sound
Factory settings
.
No (TV)
.
No (TV)
Installation
7