Use Of The Remote Control - Philips 42PW9962 User Manual

,
PICTURE SOUND
Selecting your external
VIDEO
Press this key repeatedly to select
, ,
A/V 1 A/V 2 A/V 3 CVBS
, , according to where you
A/V 4, A/V 5 A/V 6
connected your external source (see p. 23.)
b
Dual screen
q
Picture format
Press the q key repeatedly to select
another picture format: 4:3, Movie Expand
14:9, Movie Expand16:9 with or without
subtitling, Super Wide, Wide Screen or
When in Movie Expand 14:9 or 16:9 picture
format, you can make subtitles, when
available, visible or not with the o or œ
Sometimes video recorders or TV programs
carry special signals which will automatically
switch the TV to the correct screen format.
Selecting Auto format, the screen will be
filled as much as possible with the picture
when TV programs are not carrying special
signals detecting the correct screen format.
Auto format is disabled when in Dual Screen.
Note: In A/V 5 mode press the q key to switch
between a 4:3 or a 16:9 picture format.
In Dual screen mode press the q key to switch
between a full or a squeezed picture format.
X
Bilingual choice and sound mode
selection
• to switch from Stereo to Mono sound, in
case of stereo transmission;
• to switch from Main Stereo to Main
Mono or SAP (second audio program).
The setting is stored for each TV channel
CC
Closed Caption on/off
or menu
FEATURE
A/V sources
, ,
A/V 3 RGB
See p. 17
Auto Format.
keys.
Press this key
separately.
See p. 16

Use of the remote control

PICTURE
SOUND
B
FEATURE
OK
VIDEO
π
π
+ +
V
CH
- -
¬
1 2 3
b
q 4 5 6
X 7 8 9
i
0
CC A/CH
SMART CONTROLS
PICTURE SOUND
B
Standby
The set is turned off and the red indicator
lights up in front of receiver box and the
screen.
To turn the TV on again, press the B key
for two seconds or press -
Your TV consumes energy in the standby-mode.
Energy consumption contributes to air and water
pollution. We advise to switch off your TV
overnight instead of leaving it on standby. You
save energy.
V
Volume
The volume is adjusted. If you want to store
the volume adjustment in the memory, see
the Features menu, Personal Preference,
p. 14 to store the same volume adjustment
for all the stored TV channels.
Channel selection
CH
To browse through the TV channels
activated in the Favorite channels menu. See
p. 6.
¬
Mute key
Interrupt the sound temporarily or restore it.
0/9
Digit keys
To select a TV channel.
For a two or three digit channel number,
enter the second or third digit within 2
seconds.
/
Previous channel
A CH
The previously selected TV channel is
displayed.
i
Permanent channel number
Screen information
Press for 5 seconds to activate/de-activate
the continuous display of the channel
number.
Press briefly to display information about the
selected TV channel, the sound reception,
the selected DNR setting and picture format
and the remaining time set with the
sleeptimer.
.
CH +
9