Verify The Following - Cisco NCS 1010 Manual

Prepare to Install Cisco NCS 1010
Figure 1: Lifting Cisco NCS 1010
A fully loaded chassis can weigh as much as 19 kg (42 lb).
• Ensure that your footing is solid; balance the weight of the object between your feet.
• Lift the equipment slowly; never move suddenly or twist your body as you lift.
• Keep your back straight and lift with your legs, not your back. When bending down to lift equipment,
bend at the knees (not at the waist), to reduce the strain on your lower back muscles.
Step 4

Verify the following:

• Cisco NCS 1010 is not damaged. Check for a scratch, bend, discoloration, or deformation on the Cisco
NCS 1010 chassis.
• The modules that are shipped with the chassis or separately are not damaged.
Step 5 If there is any damage to the chassis or the modules, call your Cisco sales engineer for a replacement.
Unpack and Verify Cisco NCS 1010
Prepare to Install Cisco NCS 1010
3