Table of Contents
Advertisement
Contact Omron Microscan
If any of the steps in this document do not resolve your issue, contact your local Omron
Microscan Distributor or Omron for technical support.
GLOBAL DISTRIBUTORS:
Omron Microscan serves the entire world with vision inspection solutions. To locate an
authorized Omron Microscan distributor, please visit https://www.ia.omron.com/, then
locate your appropriate regional site from the Global Network panel.
Helpful Notes
1. DO NOT unplug or plug in your LVS-95XX system USB while the software is open.
2. If there is only one admin account (with permissions to add\remove operators), this
account will never be locked out on software version 3.0.9HH and higher.
3. Default admin account:
4. Prior to calibration, clean your system according to the cleaning instructions in the
Operations manual to avoid calibration issues.
5. The LVS-95XX.MDB file is the LVS-95XX database; this is where your factory
calibration is stored. When installing on a new computer from a link, you will be
notified that Factory Calibration is missing. Go to the original installation media
(installation flash drive) and recover your LVS-95XX.MDB file. (See appendix J in
the manuals folder)
6. On-site or on-line training is available for your LVS-95XX system. For more
information, contact your local Omron Microscan representative.
7. Throughout this document, "Calibrated Conformance Standard Test Card" is
referred to as "Calibration Card."
LVS-95XX Frequently Asked Questions
Operator ID: admin
Password: admin
Page 3 of 17
Advertisement
Table of Contents
