5.1.3. Installing The 2X20 Display; Figure 5-3. Tp3000 Xt With 2X20 Display - Fujitsu TeamPoS 3000 XT Installation & Maintenance Manual

TeamPoS 3000 XT

5.1.3. Installing the 2x20 Display

The 2x20 display is mounted to the top of the power supply.
To install the 2x20 display:
1. Be sure power is disconnected from the unit.
2. Remove the chassis cover plate by
sliding it up and toward you.
3. Remove the two screws that secure
the power supply cover. Lift the
cover up and forward to remove it.
4. Remove the hole plug from the
power supply cover.
5. Insert the 2x20 display into the power supply cover.
D900000172

Figure 5-3. TP3000 XT with 2x20 Display

Installation and Maintenance Manual
Cover plate
Remove
two
screws
Hole plug
5-7