Fujitsu TeamPoS 3000 XT Installation & Maintenance Manual page 31

Table of Contents

Advertisement

TeamPoS 3000 XT
For pluggable equipment, the supply plug shall be connected as follows:
Black or Brown
White or Blue
Green or Yellow
To the User:
DO read the operating instructions carefully before you attempt to use
this equipment.
DO ensure that the supply connector or isolator is readily accessible to
enable isolation of the equipment.
DO ensure that a competently trained person checks that all electrical
connections (including the supply plug and any extension leads) are
properly made in accordance with the instructions.
DO NOT allow the supply cord to be positioned where it may be
snagged, trodden-on or stretched across sharp edges.
DO NOT continue to operate the equipment if you have ANY doubt
about it working normally, or if it is damaged in any way. Instead,
switch it off and, if the equipment is pluggable, remove the supply
cord and contact your local service agent.
DO NOT remove any fixed covers unless you are qualified /
authorized to do so for the preparation of the equipment. No user
serviceable parts are under the covers unless expressly indicated in this
manual. Always remove the power supply plug from the power source
before removing any covers, and ensure ALL covers are replaced and
correctly secured before re-connecting the power supply plug.
DO NOT obstruct any of the ventilation slots in the equipment.
Obstruction of these slots can cause overheating, reduce equipment
reliability and shorten equipment life.
DO NOT expose the equipment to spilled liquids.
DO NOT replace the power supply cable with a different type than
called for in the this manual or supplied with the equipment.
D900000172
Installation and Maintenance Manual
Live (Hot)
Neutral
Ground/Earth
4-5

Advertisement

Table of Contents
loading

Table of Contents