Key To Symbols; Symbols On The Machine; Explanation Of Warning Levels - Husqvarna DXR140 Operator's Manual

Symbols on the machine

WARNING! The machine can be a
dangerous tool if used incorrectly or
carelessly, which can cause serious or
fatal injury to the operator or others.
Please read the operator's manual
carefully and make sure you understand
the instructions before using the
machine.
Noise emission to the environment
according to the European Community's
Directive. The machine's emission is
specified in the Technical data chapter and
on the label.
Always wear:
• Tight-fitting, heavy-duty and
comfortable clothing that permits full
freedom of movement.
• Sturdy, non-slip boots or shoes.
• Protective gloves.
• Protective helmet.
• Hearing protection.
• Protective goggles or a visor.
• A breathing mask, gas mask or fresh air helmet must
be used when working in environments where the air
can be harmful to health.
WARNING! Live parts.
WARNING! Ensure that no material can
fall down and cause damage when you
are using the machine.
WARNING! Watch out for demolition
material becoming loose when cutting.
Use personal safety equipment and keep
your distance.
WARNING! Always position yourself
above the machine when driving on a
slope. There is a risk of the machine
tipping.
WARNING! Exercise particular caution
when working close to edges. Ensure
that the machine is stable and does not
move closer to the edge while the work is
in progress. Ensure that the underlying
surface has satisfactory bearing capacity.
Inspections and/or maintenance
must be carried out with the motor
switched off and the power cord
disconnected.
Always connect the
machine through an ground
fault circuit interrupter with
personal protection, i.e. an
ground fault circuit interrupter that trips at an ground fault
of 30 mA.
2 – English

KEY TO SYMBOLS

Ensure that the power cable
cannot be run over. Take particular
care when moving or when the
outriggers are being retracted or
extended. Risk of electric shock.
The lifting equipment must be attached at
all the machine's lifting points.
Keep your distance! Nobody is permitted
to be within the machine's risk area when
work is underway. The machine's risk
area can vary during the course of the work.
The machine can overturn during
work. During operation the
machine must be positioned as
level as possible and the
outriggers must be fully
extended.
This product is in accordance with
applicable EC directives.
Environmental marking. Symbols on
the product or its packaging indicate that
this product cannot be handled as
domestic waste.
By ensuring that this product is taken
care of correctly, you can help to
counteract the potential negative impact
on the environment and people that can otherwise result
through the incorrect waste management of this product.
For more detailed information about recycling this
product, contact your municipality, your domestic waste
service or the shop from where you purchased the
product.

Explanation of warning levels

The warnings are graded in three levels.
WARNING!
IMPORTANT!
CAUTION!
CAUTION! Used if there is a risk of damage to materials
or the machine if the instructions in the manual are not
followed.
WARNING! Used if there is a risk of
!
serious injury or death for the operator
or damage to the surroundings if the
instructions in the manual are not
followed.
IMPORTANT! Used if there is a risk of
!
injury to the operator or damage to the
surroundings if the instructions in the
manual are not followed.