Operation; Operating Modes - Husqvarna DXR140 Operator's Manual

Operating modes

The machine can be operated in three different modes: work mode, set-up mode and transport mode. All commands in
each of the modes are described in this section.
• Work mode - In this mode you can operate everything except the caterpillar tracks and outriggers.
• Set-up mode - In this mode you can operate the caterpillar tracks and outriggers.
• Transport mode - In this mode you can operate the caterpillar tracks and some arm functions.
If no controls have been used for 3 seconds, the machine will go to circulating pump mode. In this mode, the hydraulic
oil is pumped to the tank and there will be no pressure in the cylinders.
Key to commands
1 Right and left button on left joystick
2 Right and left button on right joystick
3 Direction joystick
4 Left and right joystick respectively
Designation of the machine's parts
1 Arm 1
2 Arm 2
3 Arm 3
4 Tools
5 Outriggers
6 Caterpillar tracks
7 Tower

OPERATION

English – 25