Siemens 7XV5662-0AC03 Manual page 87

6.5 Mechanical Tests
Vibration and Shock Stress in Stationary Use
Standards
Vibration Test
IEC 60255-21-1, class 2
IEC 60068-2-6
Shock
IEC 60255-21-2, class 1
IEC 60068-2-27
Seismic vibration
IEC 60255-21-3, class 1
IEC 60068-3-3
Vibration and Shock Stress During Transport
Standards
Vibration Test
IEC 60255-21-1, class 2
IEC 60068-2-6
Shock
IEC 60255-21-2, class 1
IEC 60068-2-27
Continuous shock
IEC 60255-21-2, class 1
IEC 60068-2-29
Accessories, Communication Converter - Copper/Asynchronous Interface, Manual
C53000-B1140-C192-1, Edition 02.2022
IEC 60255-21 and IEC 60068-2
Sinusoidal
10 Hz to 60 Hz:
± 0.075 mm amplitude
60 Hz to 150 Hz:
1 g acceleration
Frequency sweep: 1 octave/min; 20 cycles in 3 orthogonal axes.
Semi-sinusoidal
5 g acceleration, duration 11 ms, 3 shocks each in both directions of the
3 axes
Sinusoidal
3 Hz to 8 Hz
± 8 mm amplitude (horizontal axis)
3 Hz to 8 Hz
± 4 mm amplitude (vertical axis)
8 Hz to 35 Hz:
2 g acceleration (horizontal axis)
8 Hz to 35 Hz:
1 g acceleration (vertical axis)
Frequency sweep: 1 octave/min; 1 cycle in 3 orthogonal axes
IEC 60255-21 and IEC 60068-2
Sinusoidal
5 Hz to 8 Hz
± 7.5 mm amplitude;
8 Hz to 150 Hz:
2 g acceleration
Frequency sweep: 1 octave/min; 20 cycles in 3 orthogonal axes.
Semi-sinusoidal
15 g acceleration, duration 11 ms, 3 shocks each in both directions of
the 3 axes
Semi-sinusoidal
10 g acceleration, duration 16 ms, 1000 shocks each in both directions
of the 3 axes
Technical Data
6.5 Mechanical Tests
41