Parameters Setting - Projecta SC420/ND Manual

7. Parameters Setting

7.1 Selecting Battery Type
To select the battery type, long press the touch button while the display is not showing the temperature.
This will enter the battery set mode.
Short press while in this mode will cycle through the folowing chemistries:
GEL (default) - For Gel type batteries
L12 - For Lithium 12V batteries
L24 - For Lithium 24V batteries
FLD - For WET/Flooded batteries
SEL - For Sealed Lead-acid/AGM batteries
To exit and save the setting, long press the touch button.
7.2 Touching Button Chart
Key System Mode
View Mode
Set Mode
Operation
Short Press
Long Press
Select battery type or tempera-
Short Press
Long Press
Operation Description
View Next Page
Enter SET mode
ture scale
Exit SET Mode & save the
settings