Positioning The Flow Baffle - Toro GrandStand74529 Operator's Manual

Multi force mower with 52in or 60in turbo force cutting unit
Table of Contents

Advertisement

Figure 24
1. Slot

Positioning the Flow Baffle

The following figures are for recommended use only.
Adjustments vary by grass type, moisture content,
and the height of the grass.
Note:
If the engine power draws down and the
mower ground speed is the same, open the baffle.
Position A
This is the full, rear position (see
position for the following:
In short, light grass mowing conditions
In dry conditions
Smaller grass clippings
Propels grass clippings farther away from the
mower
Figure 25
g012676
2. Nut
Figure
25). Use this
g012677
Position B
Use this position when bagging
Position C
This is the full, open position
position for the following:
In tall, dense grass mowing conditions
In wet conditions
Lowers the engine-power consumption
Allows increased ground speed in heavy conditions
21
(Figure
26).
Figure 26
(Figure
27). Use this
Figure 27
g012678
g012679

Advertisement

Table of Contents
loading

This manual is also suitable for:

Grandstand 74523

Table of Contents