Advertisement
GrandStand
For All Grandstand
Setup
Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure
1
2
3
4
5
1
Checking the Tire Pressure
No Parts Required
Procedure
Maintain the air pressure in the rear tires at 83 to 97
kPa (12 to 14 psi).
Important:
Uneven tire pressure can cause an
uneven cut.
Note:
The front tires are semi-pneumatic tires and do
not require air-pressure maintenance.
© 2022—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
®
Revolution Mower
®
Revolution Mowers
Description
No parts required
No parts required
Battery charger
No parts required
Operator's Manual
Registration card
Key
Register at www.Toro.com.
Form No. 3454-491 Rev A
Qty.
–
Check the tire pressure.
–
Check the grass deflector.
1
Charge the batteries.
Check the machine before delivery to
–
the customer (all machines).
1
1
Deliver the machine to the customer.
2
Figure 1
Original Instructions (EN)
Printed in the USA
All Rights Reserved
Setup Instructions
Use
g001055
*3454-491*
Advertisement
Table of Contents
Related Manuals for Toro GrandStand Revolution
Summary of Contents for Toro GrandStand Revolution
- Page 1 Uneven tire pressure can cause an uneven cut. Note: The front tires are semi-pneumatic tires and do not require air-pressure maintenance. *3454-491* © 2022—The Toro® Company Original Instructions (EN) Register at www.Toro.com. 8111 Lyndale Avenue South Printed in the USA Bloomington, MN 55420...
- Page 2 Checking the Grass Charging the Batteries Deflector Parts needed for this procedure: Battery charger No Parts Required Procedure Procedure Charge the batteries per the instructions in the DANGER Operator’s Manual for the machine. An uncovered discharge opening allows objects to be thrown toward you or bystanders.
- Page 3 Checking the Machine Before Delivery to the Customer (all machines) No Parts Required Procedure Before delivering the machine to the customer, ensure that you perform or have performed the procedures listed in the following table and initial each when finished. Refer to the Operator's Manual for instructions on performing these procedures.
- Page 4 Make sure that the customer receives the Operator's Manual and Setup Instructions. Make sure that the customer knows the Parts Catalog and operator-training materials are available at www.Toro.com. Assist the customer in loading the machine. Note: When you, the dealer representative, have finished delivering the machine to the customer, sign and date in the space provided below and keep a copy of this page for dealer records.
Need help?
Do you have a question about the GrandStand Revolution and is the answer not in the manual?
Questions and answers