Operating The Throttle; Operating The Ignition Switch; Starting The Engine - Toro GrandStand74529 Operator's Manual

Operating the Throttle

You can move the throttle control between F
S positions (Figure
LOW
Always use the F position when engaging the PTO.
AST
Figure 13
Operating the Ignition
Switch
Important:
Do not engage the starter for more
than 5 seconds at a time. If the engine fails to
start, wait 15 seconds between attempts. Failure
to follow these instructions can burn out the
starter motor.
Note:
You may need to repeat the cycle for starting
the engine when you start it for the first time after you
have filled a completely empty fuel system with fuel.
Figure 14
Figure 15
AST
13).

Starting the Engine

and Important:
Do not engage the starter for more
than 5 seconds at a time. If the engine fails to
start, wait 15 seconds between attempts. Failure
to follow these instructions can burn out the
starter motor.
Note:
You may need to repeat the cycle for starting
the engine when you start it for the first time after you
have filled a completely empty fuel system with fuel.
Note:
The machine may have difficulty starting under
severe cold conditions. When starting a cold machine,
keep the machine above -23°C (-10°F).
g008946
g031239
g031281
16
Figure 16
g032689