Calling While Playing Back Music - Sony DRC-BT60 Operating Instructions Manual

Calling while playing back music

The Bluetooth connection using HFP
or HSP as well as A2DP is necessary to
make a call while playing back music.
For example, to make a call using a
Bluetooth mobile phone while listening
to music on a Bluetooth compatible
music player, the unit needs to be
connected to the mobile phone using
HFP or HSP.
Make a Bluetooth connection
between the unit and the
device in use following the
procedures outlined below.
1
Make a Bluetooth connection
between the unit and the
mobile phone in use with HFP
or HSP following the
procedures outlined in
"Calling" (page 0).

Operate the Bluetooth device
(music player or mobile phone)
used for playing the music to
make a Bluetooth connection to
the unit using ADP.
4
GB
To make a call while playing
back music
1
Make a call by performing the
steps of "To call" (page 1).
When making a call, the music
pauses and the ring tone is heard
from the unit.
After finishing the call, press the
button. The unit is switched
back to music playback.
To receive a call while playing
back music
When an incoming call arrives, the
music pauses and the ring tone is
heard from the unit.
1
Press the button and talk.
After finishing the call, press the
button. The unit is switched
back to music playback.
When no ring tone is heard
even if an incoming call arrives
1
Stop music playback.

When ringing, press the
button and talk.