Listening To Music - Sony DRC-BT30 Operating Instructions Manual

OPERATING THE UNIT

Listening to music

POWER button
This unit supports SCMS-T content
protection. You can enjoy music, etc.,
from a device such as a mobile phone
or portable TV that supports SCMS-T
content protection.
Check the following before operating
the unit.
– The Bluetooth device is turned on.
– Pairing of this unit and the
Bluetooth device is complete.
– The Bluetooth device supports the
transmitting music function (profile:
A2DP*).
1
Press and hold the POWER
button for about  seconds
while the unit is turned off.
The indicator (blue) flashes twice
and the unit is turned on.
14
GB
Jog switch
Note
After the unit is turned on, the unit
attempts to connect to the last
connected Bluetooth device
automatically with HFP or HSP.
When not calling with this unit, do not
make the last connected Bluetooth
device ready for HFP or HSP
connection. To make or receive a call
while playing back music, see page 20.

Make the Bluetooth connection
(ADP) from a Bluetooth device
to this unit.
Refer to the operating instructions
supplied with the Bluetooth device
on how to operate it.

Start playback on the Bluetooth
device.
Tip
Bluetooth connection of A2DP can also be
operated with the jog switch from this unit
to the Bluetooth device except when making
a call on this unit.
Notes
 When you play music by connecting the
unit to a Bluetooth device using HSP,
sound quality will not be high. For better
sound, change the Bluetooth connection to
A2DP by operating the Bluetooth device.
 If this unit is turned off while an A2DP
Bluetooth connection is established,
operate the unit again from step 1 to make
the A2DP Bluetooth connection again.
* For details on profiles, see page 4.