The next step is to bind a sensor in the zone.
You are given the option of using the evotouch internal sensor, or
an external room sensor:
If the zone contains the evotouch controller, and you want to use
the internal sensor, press INTERNAL.
Note: Only one zone can be controlled by the internal sensor.
Selecting the internal sensor automatically configures all other
zones to use external sensors.
Otherwise press EXTERNAL and you will be prompted to bind a
room sensor in the zone:
• Press the BIND button on the sensor.
• When a successful response has been received press DONE.
You will be returned to the ADD ZONE menu.
Delete Zone
You are first prompted to specify the zone to be deleted:
• Press the zone you want to delete.
You are then prompted to confirm the action:
• Press DONE to delete the selected zone.
7