Connection to the ports
NOTICE ►Use the cables with straight plugs, not L-shaped ones, as the
input ports of the projector are recessed.
►Only the signal that is input from the COMPUTER IN can be output from the
MONITOR OUT port.
A
COMPUTER IN,
D-sub 15pin mini shrink jack
<Computer signal>
• Video signal: RGB separate, Analog, 0.7Vp-p, 75Ω terminated (positive)
• H/V. sync. signal: TTL level (positive/negative)
• Composite sync. signal: TTL level
<Component video signal>
• Video signal: Y with composite sync, Analog, 1.0±0.1Vp-p, 75Ω terminated
Cb/Pb, Analog, 0.7±0.1Vp-p, 75Ω terminated
Cr/Pr, Analog, 0.7±0.1Vp-p 75Ω terminated
• System: 480i@60, 480p@60, 576i@50, 720p@50/60, 1080i@50/60, 1080p@50/60
Pin
1
Video Red, Cr/Pr
2
Video Green, Y
3
Video Blue, Cb/Pb
4
(No connection)
5
Ground
6
Ground Red, Ground Cr/Pr
7
Ground Green, Ground Y
8
Ground Blue, Ground Cb/Pb
LWU1200-DS
User's Manual - Technical
A
B
B
MONITOR OUT
Signal
Pin
9
(No connection)
10 Ground
11
(No connection)
A : SDA (DDC data) B : (No connection)
12
13 H. sync / Composite sync.
14 V. sync.
A : SCL (DDC clock) B : (No connection)
15
11
Connection to the ports
⑪
⑫
⑬
⑭
⑮
⑥
⑦
⑧
⑨
⑩
①
②
③
④
⑤
Signal
020-001894-01 Rev. 1 (01-2021)
LIT MAN USR LWU1200-DS TECH
⑤
⑮