Christie DS Series User Manual page 26

Hide thumbs Also See for DS Series:

Network Bridge Communication

This projector is equipped with NETWORK BRIDGE function.

When the projector connects to the computer by wired or wireless LAN

communication, an external device connected with this projector by RS-232C

communication can be controlled from the computer as a network terminal.

For details, see the 7. Network Bridge function in the Network Guide.

NOTE • If data is transferred using wireless and wired LAN at the same time,

the projector may not be able to process the data correctly.

Connection

If you use wired LAN or HDBaseT, connect the computer's LAN port and

the projector's LAN or HDBaseT port with a LAN cable. Use the cable that

fulfi lls the specifi cation shown in fi gure. If you use wireless LAN, insert the USB

wireless adapter into the projector's WIRELESS port.

Connect the projector's CONTROL port and the RS-232C port of the devices

that you want to control with a RS-232C cable.

Turn the computer on, and after the computer has started up turn the

projector on.

Set the COMMUNICATION TYPE to NETWORK BRIDGE in the

COMMUNICATION menu of the OPTION - SERVICE menu.

LWU1200-DS

User's Manual - Technical

WIRELESS port

LAN

LAN or

HDBaseT port

LAN cable

(CAT-5e or greater)

USB wireless adapter

RS-232C cable

(cross)

RS-232C

020-001894-01 Rev. 1 (01-2021)

LIT MAN USR LWU1200-DS TECH

Table of Contents

Lwu1200-ds