Advertisement
2. Push the button to remove the stand-base assy.
3. Remove the screws to remove the Rear cover.
4. Remove the tapes and disconnect the connectors
5. Remove the screws to remove the WEBCAM MODULE
6. Remove the AUDIO /USB /KEY BOARD
7. Remove the screws to remove the Latch
8. Remove the tapes and Disconnect the pins and remove the speakers
9. Remove the screws on mid-frame
10. Remove the mylar on PCBA Board. Remove the main board and power board
11. Remove the connectors and Remove the screw to remove the Connector Board
12. Remove the screws to remove the Webcam holder_B other
Remove the Webcam Module.
13.
3.2 Location of components requiring selective treatment. The photos and/or graphics below identify the location of the parts or
components requiring selective treatment within the main unit. For End-of-Life product disassembly instructions of external
accessories including external power supply (EPS), external keyboard (KB) external mouse and external cables and cords, refer to the
following URL:
End-of-Life Product Disassembly Instructions (hp.com)
1. Precaution
Please read the precautions as follows to prevent any damages to the LCD Monitor.
Make sure all power connection is removed. Be sure that the LCD Monitor is in power off status.
Prepare soft cloth and sponge as
working platform to place LCD
monitor horizontally.
EL-MF877-00
Template Revision D
last updated May-2022
HP Inc. instructions for this template are available at
EL-MF877-01
Page 3
Advertisement
