Advertisement
Item Description
Cathode Ray Tubes (CRT)
Capacitors / condensers (Containing PCB/PCT)
Electrolytic Capacitors / Condensers measuring greater
than 2.5 cm in diameter or height
External electrical cables and cords
Gas Discharge Lamps
Plastics containing Brominated Flame Retardants (not
including external electrical cables and cords, PCBs or
PCAs already listed as a separate item above)
Components and parts containing toner and ink,
including liquids, semi-liquids (gel/paste) and toner.
Include the cartridges, print heads, tubes, vent
chambers, and service stations.
Components and waste containing asbestos
Components, parts and materials containing
refractory ceramic fibers
Components, parts and materials containing
radioactive substances
Components containing chlorofluorocarbons (CFC),
hydrochlorofluorocarbons (HCFC) or
hydrofluorocarbons (HFC), hydrocarbons (HC)
2.0 Tools Required
List the type and size of the tools that would typically be used to disassemble the product to a point where components and
materials requiring selective treatment can be removed.
Tool Description
Screwdriver
HEX header screwdriver
Heatgun
Suction cup
3.0 Product Disassembly Process
3.1 List the basic steps that should typically be followed to remove components and materials requiring selective treatment including
the required steps to remove the external enclosure.
1. Lay the monitor on a flat, soft and clean surface.
EL-MF877-00
Template Revision D
last updated May-2022
Components and parts requiring selective
treatments
☒ Power Supply capacitor(s) or condenser(s)
☒ AC power cord
☐ Audio, video or data cables
☒ Other: ___ HDMI cable/DP cable/USB 3.0 A-B cable
______
HP Inc. instructions for this template are available at
EL-MF877-01
Quantity of
items
included in
product
0
0
1
4
0
0
0
0
0
0
0
Tool Size (if
applicable)
RUBICON
NO-107 NO.2
5.0mm 9400-
M5 Pro'sKit
N/A
N/A
Page 2
Advertisement
