Hints And Tips - Zanussi ZDLN1522 User Manual

9.2 Setting and starting a
programme
Starting a programme
1. Keep the appliance door ajar.
2. Press the on/off button to activate the
appliance. Make sure that the appliance
is in programme selection mode.
3. Press the programme button repeatedly
until the indicator of the programme you
want to select starts flashing.
4. Close the appliance door to start the
programme.
Starting a programme with delay start
1. Set a programme.
2. Press the delay button to delay the start
of the programme by 3 hours.
The indicator is on.
3. Close the appliance door to start the
countdown.
During the countdown, it is not possible to
change the programme.
When the countdown is complete, the
programme starts.
Opening the door while the appliance
operates
Opening the door while a programme is
running stops the appliance. It may affect the
energy consumption and the programme
duration. After closing the door, the appliance
continues from the point of interruption.
If the door is opened for more than 30
seconds during the drying phase, the
running programme ends. It does not
happen if the door is opened by AirDry
function.

10. HINTS AND TIPS

10.1 General
Follow the hints below to ensure optimal
cleaning and drying results in daily use and to
protect the environment.
Do not try to close the appliance door
within 2 minutes after AirDry
automatically opens it as this may cause
damage to the appliance.
If, afterwards, the door is closed for at
least 3 minutes, the running programme
ends.
Cancelling the delay start
Press the on/off button for 3 seconds until the
appliance is in programme selection mode.
When you cancel the delay start, you have to
set the programme again.
Cancelling the programme
Press the on/off button for 3 seconds until the
appliance is in programme selection mode.
Make sure that there is detergent in the
detergent dispenser before you start a new
programme.
The Auto Off function
This function decreases energy consumption
by deactivating automatically the appliance
when it is not operating.
The function comes into operation:
• When the programme is complete.
• After 5 minutes if a programme was not
started.
End of the programme
When the programme is complete, the Auto
Off function switches the appliance off.
Close the water tap.
• Washing dishes in the dishwasher as
instructed in the user manual usually
consumes less water and energy than
washing dishes by hand.
ENGLISH 15