Standard Gauge - Yamaha SXV4NP Operator's Manual

H. Engine Hour Meter/
Odometer/Trip Meter/
Clock
This display shows engine hours, odome-
ter, trip meter, or clock. Press the Lower
Right Button to change which parameter
is being displayed. The Engine Hour
Meter and Odometer cannot be reset. To
reset the trip meter, select the Trip Meter;
then press and hold the Lower Right But-
ton until the trip meter display reads 0.

NOTE: The clock can only be dis-
played in this position if it is not
already being displayed in the main
right screen. To set the clock when
the clock is in this position, press
and hold the Lower Right Button;
then use the procedure found in G.

Standard Gauge

1. Left Button — Shifts top display
through speedometer and RPM.
2. Middle Button — Shifts middle dis-
play through speedometer, RPM,
clock, odometer, trip 1, trip 2, and
engine hours.
3. Right Button — Shifts bottom dis-
play through coolant temperature,
battery voltage, intake air tempera-
ture, exhaust temperature, and fuel
level.
4. Speedometer/Tachometer
— Indicates approximate vehicle
speed in MPH or KM/H when the
speedometer function is selected,
and RPM when the tachometer func-
tion is selected. Press the Left But-
ton to change which parameter is
being displayed. With speedometer
selected, press and hold the Left
Button to shift between standard
(mph/miles/Fahrenheit) and metric
(km/h/kilometers/Celsius).
5. Engine Hour Meter/Odometer/Trip
Meter/Speedometer/Tachometer/
Clock Display — Displays engine
hours, odometer, trip meter, speed-
ometer, tachometer and clock. Press
the Middle Button to change which
parameter is being displayed. The
Engine Hour Meter and Odometer
cannot be reset. To reset the trip
meter, select the Trip Meter; then
press and hold the Middle Button
until the trip meter display reads 0.
With the clock mode selected, press
and hold the Left Button to set the
clock. The option of selecting the
12-hour or 24-hour clock is avail-
able; press the Left Button to alter-
nate between the two modes. Next,
press the Middle Button to set the
ZR-393A
clock. Press the Left or Right Button
to set the hours; then press the Mid-
dle Button to set the minutes. Press
the Left or Right Button to set the
minutes. When the proper time has
been set, press the Middle Button to
return to the main gauge display.
6. Coolant Temperature/Battery Volt-
age/Intake Air Temperature/Exhaust
Temperature/Fuel Level Display —
Displays coolant temperature, bat-
tery voltage, exhaust temperature
and fuel quantity. Press the Right
Button to change which parameter is
being displayed. Press and hold the
Right Button to see the actual values
associated with the mode selected.
7. Gear Position Indicator — Indicates
what gear the transmission is in.
Display
7