Table of Contents
Advertisement
Figure 71 - Tag Value
5.3.5 Converting Data
1.
Right-click on Tasks / MainProgram and choose Add
New Routine
Figure 72 - Add New Routine
2.
Write Name: Conversion and select Type: Structured
Text Click OK
Figure 73 - New Routine Dialogue Box
3.
Go back to Controller Tags, and Go Offline to create
the following tags:
Name
vel_rms_divider
acc_rms_divider
skin_temp_divider
sensor1_serial_number
sensor1_acc_rms
sensor1_vel_rms
sensor1_skin_temp
sensor1_units
sensor1_time
4
Go Offline to change Data Type.
Figure 74 - Go Offline
Figure 75 - Controller Tags
5.
Double-click MainProgram
Go to the Configuration tab and select Conversion for
6.
Main and <none> For Fault.
15
DODGE® On-Premise Gateway User Guide
Data Type
DINT
DINT
DINT
DINT
REAL
REAL
REAL
BOOL
DINT
Advertisement
Table of Contents
