Advertisement
Quick Links
- THIS WALL MOUNT CABINET IS FOR THE STORAGE OF COMPONENTS
ONLY AND IS NOT INTENDED TO HAVE A TV PLACED/STORED ON IT.
- Please follow these assembly instructions as it will save you time, make
assembly easier and prevent possible damage to your new unit.
- We strongly recommend that the unit is assembled on a soft surface such
as carpet or blanket.
- Correct assembly / installation is your responsibility.
- Depending on your wall construction, Brick or Stud. The installation
method wil vary. Please follow the appropriate instructions for your
Particular circumstance.
- Maximum weight capacity of this unit is 20 kg.
- When moving this furniture item, always carry the unit. Dragging or
sliding the unit could damage the unit and the floor surface.
Assembly Instruction Manual
MODEL NO.: HOVER1800
Advertisement
Related Manuals for Tauris HOVER1800
Summary of Contents for Tauris HOVER1800
- Page 1 Assembly Instruction Manual MODEL NO.: HOVER1800 - THIS WALL MOUNT CABINET IS FOR THE STORAGE OF COMPONENTS ONLY AND IS NOT INTENDED TO HAVE A TV PLACED/STORED ON IT. - Please follow these assembly instructions as it will save you time, make assembly easier and prevent possible damage to your new unit.
- Page 2 As all installation environments are different you may not have all the necessary installation hardware provided in the hardware pack supplied with this unit. If you require further fixings please visit your local hardware store and purchase other required fixings. The fixings provided in this pack are for a basic install only.
- Page 3 The following Instructions are provided as a guide for installing this Wall Cabinet WE RECOMMEND THAT A PROFESSIONAL INSTALLS THIS PRODUCT POSITIONING AND MOUNTING YOUR WALL CABINET Decide on the height you would like the top of your new Wall Mount Cabinet to be. Measure 117mm down your wall to mark your first hole location.
- Page 4 OPTON 1 - FOR STUD WALL STUD WALL SAFETY NOTE: The mounting board has fixing holes in place for a standard stud wall. Please usa a stud finder to ensure that you are fixing into the studs. TAKE OFF THE DRAWER Press the runner clip downward at right side and press the runner clip upward at left side to take out the drawer...
-
Page 5: Safety Note
LIFTING CABINET ONTO THE WALL SAFETY NOTE: This step must be completed by two persons to ensure the weight of cabinet is evenly distributed across mounting board and eliminate physical injury to individuals. SECURING CABINET TO WALL MOUNT SAFETY NOTE: For the safety of others you must ensure that this cabinet is secured to the wall mount with the provided screws as shown. - Page 6 Align the runners on both sides of the drawer, push the left drawer into left side of the cabiet, and push the right drawer into right side of the cabinet. Maximum weight capacity of this unit is 20 KGS Maximum weight capacity of this unit is 20 KGS...
- Page 7 MODEL NUMBER OF THE UNIT PURCHASED DESCRIPTION/PART NUMBER OF THE MISSING OR FAULTY PART QUANTITY OF THE PARTS NEEDED If for whatever reason you cannot get in contact with the store, please get in contact with Tauris direct at http://www.rvm.com.au/contact/ Product of RVM Australia...
-
Page 8: Warranty Policy
2. Subject to Clause 1, the Seller warrants that TAURIS branded products will be free of manufacturing defects and will perform to the Seller’s specifications subject to the following clauses. - Page 9 b.) Make note of the defects reported by the Owner. c.) Take back the defective goods from the owner and determine within a reasonable time through dialogue with the Seller whether the goods are defective. d.) Advise the owner within a reasonable time frame whether it accepts or rejects the Product claim.