Download Print this page

Advertisement

Quick Links

www.rvm.com.au
- Please follow these assembly instructions as it will save you time, make
assembly easier and prevent possible damage to your new unit.
- We strongly recommend that the unit is assembled on a soft surface such
as carpet or blanket.
as power tools can strip threads if over tightened.
- Correct assembly is your responsibility.
- When moving this furniture item, always carry the unit. Dragging or
sliding the unit could damage the unit and the floor surface.
Assembly Instruction Manual
MODEL NO.: RIO2200LLOAK
222

Advertisement

loading

Summary of Contents for Tauris RIO2200LLOAK

  • Page 1 Assembly Instruction Manual MODEL NO.: RIO2200LLOAK www.rvm.com.au - Please follow these assembly instructions as it will save you time, make assembly easier and prevent possible damage to your new unit. - We strongly recommend that the unit is assembled on a soft surface such as carpet or blanket.
  • Page 2 DRAWER BOX SIDE DRAWER BOX SIDE DRAWER BOX SIDE DRAWER BOX SIDE TOP SUPPORT BACK PANEL TOP PANEL BOTTOM PANEL BASE FRONT & BACK BASE SIDE/SUPPORT DRAWER BACK DRAWER SIDE DRAWER SIDE DRAWER SUPPORT DRAWER BOTTOM x 52pcs DRAWER FRONT DRAWER FRONT CENTER TOP DRAWER BOX...
  • Page 4 arrowhead on cam points toward to the hole on the panel edge. arrowhead on cam points toward to the hole on the panel edge.
  • Page 5 arrowhead on cam points toward to the hole on the panel edge. 4pcs arrowhead on cam points toward to the hole on the panel edge.
  • Page 6 x4pcs x4pcs arrowhead on cam points toward to the hole on the panel edge.
  • Page 7 arrowhead on cam points toward to the hole on the panel edge. arrowhead on cam points toward to the hole on the panel edge.
  • Page 8 FOR 2 DRAWERS x10pcs x10pcs x10pcs REMINDER: 2 colors of Part 16 is provide, White and Grey, Please make sure 2 piece of Part 16 are in same color in assemble. arrowhead on cam points toward to the hole on the panel edge.
  • Page 9 Drawer Front Alignment Drawer front panel If the drawer front panel is NOT level after being assembled, then... Drawer front panel Loosen the screw Adjust the slide up or down Loosen the screws on the left and right hand side, then move the drawer slide up or down, untill the drawer fronts are even/level, then tighten the screws Drawer front panel...
  • Page 10 MODEL NUMBER OF THE UNIT PURCHASED DESCRIPTION/PART NUMBER OF THE MISSING OR FAULTY PART QUANTITY OF THE PARTS NEEDED If for whatever reason you cannot get in contact with the store, please get in contact with Tauris direct at http://www.rvm.com.au/contact/ Product of RVM Australia...
  • Page 11: Warranty Policy

    WARRANTY POLICY 1. Nothing in this Warranty affects the Consumer’s rights under the Australian Consumer law. The benefits to the Consumer under this Warranty are in addition to the rights and remedies of the buyer under any Consumer Guarantees. The Australian Consumer Law requires that we confirm that: Our goods come with guarantees that cannot be excluded under the Australian Consumer Law.
  • Page 12 b.) Make note of the defects reported by the Owner. c.) Take back the defective goods from the owner and determine within a reasonable time through dialogue with the Seller whether the goods are defective. d.) Advise the owner within a reasonable time frame whether it accepts or rejects the Product claim.