Installing Dust Collection Bag; Installing & Cleaning Foam Wet Filter - Vacmaster VBV1210 Operator's Manual

INSTALLING DUST COLLECTION BAG

2
Dust collection bag sold separately.
1. Verify that the power cord is disconnected from the outlet (Fig.1).
2. Remove the powerhead and place in an upside-down position.
4. Unfold the dust bag so that it is evenly distributed around the inside of the tank (Fig. 3).
5. Place the powerhead back onto the collection tank.
INSTALLING & CLEANING FOAM WET FILTER
2
INSTALLING FOAM WET FILTER
1. Verify that the power cord is disconnected from the outlet (Fig.1).
2. Remove the powerhead and place in an upside-down position. Follow instructions to remove the
covered (Fig. 2 & 3).
4. Place the powerhead back onto the collection tank.
CLEANING FOAM WET FILTER
(Fig. 4).
3
3 4
14
5